Document Set4Table of ContentsSafety Information......About the Book.........Part I XBTG Panels........15At a glance............15Chapter 1 Overview.............At a glance ..............17Series of XBTG Panels..........1819Series XBTG panels and standards .................................2021Chapter 2 XBTG Device Connectivity.....................232426Chapter 3 Specifications..............293.1General specifications.....3131Electrical specifications.....32Environmental specifications.............33343.2Functional specifications...........................................35536Memory and clock.......39Interfaces.......403.3 Interface specifications........4242Specification serial interface COM1..................................43Specification of serial interface COM2................................465Other interfaces.....................3.4Part numbers and functions.............Part numbers and functions....DIP Switches......................533.5.54XBTG2110 dimensions..............XBTG2120,XBTG2130,XBTG2220,and XBTG2330 dimensions...........56XBTG4320 and XBTG4330 dimensions...............................57XBTG5230,XBTG 5330 and XBTG6330 dimensions.....................58Panel cut dimensions..................59Installation Fasteners.......60Chapter 4 Installation and wiring.......61.614.1Installation.............63Installation procedures....4.2Wiring Precautions..........Connecting the Power Cord...Connecting the Power Supply..Input/Output Line placement ....4.3 Tool Port Connector...........Tool Port Connector....USB Data Transfer Cable(XBTZG925)-Installation4.4Ethemet Cable Connector......................80Ether Cable Connector................................4.5Printer Cable Connector.....................Printer cable connector .....4.6CF Card Installation and Removal....................................84CF Card Installation and Removal....844.7Sound Output.............87Part ll Settings and debugging.....89At a Glance........89Chapter 5 Settings......At a Glance.........5.193At a Glance.......Types of Settings........94Offline settings.......6System settings...........98Chapter 6 Troubleshooting........101At a Glance.............1016.1 Troubleshooting Checklists.....103Troubleshooting Checklists...103105Self test item list.........105Chapter 7 Maintenance ........At a glance...........109Regular Cleaning.......110Periodic check points...112Replacing the backlight.........1131157Safety InformationGeneral Safety PrecautionsNOTICERead these instructions carefully,and look at the equipment to bee familiar withthe device before trying to install,operate,or maintain it.The following specialmessages may appear throughout this documentation or on the equipment to warnof potential hazards or to call attention to information that clarifies or simplifies aprocedure.The addition of this symbol to a Danger or Warning safety label indicatesthat an electrical hazard exists,which will result in personal injury if theinstructions are not followed.This is the safety alert symbol.It is used to alert you to potential personalinjury hazards.Obey all safety messages that follow this symbol to avoidpossible injury or death.ADANGERDANGER indicates an imminently hazardous situation,which,if not avoided,willresult in death,serious injury,or equipment damage.AWARNINGWARNING indicates a potentially hazardous situation,which,if not avoided,canresult in death,serious injury,or equipment damage.9Safety InformationACAUTIONCAUTION indicates a potentially hazardous situation,which,if not avoided,can resultin injury or equipment damage.AT a glanceThis manual includes procedures that must be followed to operate the XBTGcorrectly and safely.Be sure to read this manual and any related materialsthoroughly to understand the correct operation and functions of this unit.10Safety InformationGeneral SafetyPrecautionsAWARNINGUNINTENDED EQUIPMENT OPERATION.Loss of controlControl system must be designed to avoid a malfunction caused by a munication faultbetween the XBTG and the host controller.Backlight BurnoutIn case of backlight failure,make sure the "disable screen"feature is enabled.Failure to follow these instructions can result in death,serious injury,or equipmentdamage.This equipment must be installed and operated by qualified personnel.Disconnect all power before working on or inside equipment.Ensure the power supply matches the power requirements of the XBTG.Do not strike the touch panel with a hard or pointed object,or press on the touchpanel with excessive force,since it may damage the touch panel or the display.Do not use this unit in locations where large,sudden temperature changes maycause condensation inside.Do not store or use the XBTG where chemicals(such as organic solvents,etc.)and acids can evaporate,or where chemicals and acids are present in the air.Corrosive chemicals acids,alkalines,liquids containing salt.Flammable chemicals organic Solvents..Do not use paint thinner or organic solvents to clean the XBTG.Do not store or operate the LCD display in areas receiving direct sunlight,sincethe sun's UV rays may cause the LCD display's quality to deteriorate.Storing this unit at temperatures higher or lower than specifications may damagethe panel.Vertical mounting is remended.After turning the XBTG OFF,be sure to wait 30 seconds before turning it ONagain.If the XBTG started too soon,it may not start up correctly.For maximum product life allow 100mm ventilation space from energizedponents..Alterations beyond those specified in this manual will void the product warranty.When using scripts to display screens,ensure that they are not displayed in aPopup window.Failure to follow this instruction may cause the image to beclipped within the Popup window.11Safety InformationThe vibrate mode is not available on the XBTG;this mode is reserved for a futureuse.While in the modification mode with the virtual keyboard displayed,any changeof focus (outside of the virtual keyboard window)will close the virtual keyboardand input data will be lost.During the design phase of your project,ensure that only one protocol isconfigured to a munications port.Multiple protocols can not be assigned toa single port.If sound distortion is present,check the file format of the sound (*.wav)file usedand ensure that it is formatted for 16 bits,11 kHz.Concerning the USB Data Transfer Cable XBTZG925To prevent damage to the USB data transfer cable:Do not use or store this cable at very high temperatures,or in direct sunlight.Do not use or store this cable in excessively dusty or dirty environments.Do not use or store this cable in a environment where it may be exposed tochemical vapors or fumes.Do not allow water to enter the connector.Also,do not touch the connector if yourhands are wet.This may cause an electrical shock.Do not connect or disconnect the USB data transfer cable during data transfer.Doing so may cause a data munication error.AWARNINGUNINTENDED EQUIPMENT OPERATION.Care must be taken during design not to allow Pop up windows to overlay virtual keyboard.Failure to follow these instructions can result in death,serious injury,or equipmentdamage.12