6InstallationNotice6.1 Sizes1.The warranty range is confined to the PLC only.2.Warranty period is 18 months,within which periodThere are five l/O extension module models:Emerson Network Power conducts free maintenance andEC10-0800ENN.,EC10-0808ERN.EC10-0808ETN,repairing to the PLC that has any fault or damage under theEC10-0008ERN and EC10-0008ETN.Their sizes andnormal operation conditions.installation holes are shown in Figure 6-1.3.The start time of warranty period is the delivery dateof the product.of which the product SN is the sole basis of71.204.561judgment.PLC without a product SN shall be regarded as4.Even within 18 months,maintenance will also be chargedin the following situations:Damages incurred to the PLC due to mis-operationswhich are not in pliance with the User Manual:Damages incurred to the PLC due to fire.flood.abnormal voltage,etc;Damages incurred to the PLC due to the improper useFigure 6-1 VO extension module sizes and installationof PLC functions.holes5.The service fee will be charged according to the actualcosts.If there is amy contract,the contract prevails.6.2 Installation Method6.Please keep this paper and show this paper to theThe installation method of extension module is the same asmaintenance unit when the product needs to be repaired.that of the basic module.See EC10 PLC User Manual for7.If you have any question,please contact the distributor ordetails.See Figure 6-2 for the installation diagram.our pany directly.ENP Services ChinaEmerson Network Power Co.,LtdAddress:No.1 Kefa Rd..Science Industry Park.NanshanPull out DIN rail clipDistrict 518057.Shenzhen ChinaHomepage:www.emersonworkpower..E-mail:support@emersonwork..35mm wide DINVersionV1.0Fix to DIN rail,Push back the clipRevision dateSeptember 19.2006Figure 6-2 DIN rail mountingBOM31011330Copyright 2006 by Emerson Network Power Co..Ltd.All rights reserved.The contents in this document aresubject to change without notice.4