注释Ready for switch on(1=Yes 0=No)Ready for operation (1-Yes 0-No)Dperation enabled (1-Yes 0-No)Fault present (Yes 0=No)No coasting down active(1=0FF2 inactive 0=0FF2 active)Switching on inhibited active(l=Yes 0-No)Alarn present (1-Yes 0-X)Following error in tolerance(t-Yes D=No)实操派文库一最全的工业自动化手册下载Control requeset(1=Yes 0=No)Target Position reached (1=Yes /0-N)Axis accelerating(1=Yes 0=No),p2080[14]Axis decelerating(1=Yes 0=No).p2080[15]Active traversing block bit 0(1=Active 0=Not active)Active traversing block bit 1(1=Active 0-Not active)Active traversing block bit 2(1=Active 1-Xot active)Active traversing block bit 3(1=Active 1=Not active)Active traversing block bit 4(1=Active 0=Not active)Active traversing block bit 5(1=Active 0=Not active)ReservedSTOP can minus active(1=Yes 0=No),p2083[8]Jog active(1=0n 0=0ff)Honing procedure active(1=0n 0=0ff)Fiying referencing active(1-Active D-Not active),p2083[12]VDI active(1=Active 0=Not active)Velocity liniting active(l-Yes 0-No)Setpoint fixed(1-Yes 0-No),p2084[1]Printing mark outside outer vindow(1=Yes 0=No),p2084[3]Software linit switch ninus Reached (I=Yes 0=No),p2084[6]Software linit switch plus Reached(1-Yes 0-No),p2084[7]Position actual value